KK968 for fountain pool?

Work Method:

  1. Hack and remove all the old fiber membrane from the fountain pool.
  2. Clean the entire surface by using high pressure water gun.
  3. Apply diluted KK233 as penetration then original KK233 as basecoat.
  4. Apply few layers of KK968 (≈1mm) at vertical side walls; (≈2mm) on horizontal floor.
  5. Strictly allow 48 hours of curing time for KK968 fully dry before apply cement screeding.
  6. Lastly, install the tiles or fiber membrane at the fountain pool.
× The above method is only for suggestion, please refer to professional or contact us for any others inquiries.

Share This:

© 2019 King Kote. All Rights Reserved. Designed by PAKO®
Back to top