Wall Failed to Disperse Heat

A. Directions: Generally, the walls of building expose under hot weather will cause the heat invade into the walls. Therefore, in the case of the walls could not radiating and it cause the air-condition reduce indoor temperature.

B. In the evening, the walls started to release the heat and the room will heat up gradually. KINGKOTE KK699 heat insulation is suitable for solving this problem.

C. Countermeasure: In accordance with the following construction methods could be easily solving your problem.

1. Clean up the dirt facades.
2. Apply KINGKOTE KK233 as a primer, for waterproofing method use permeable interface to enhance the strength of the external walls.
3. Apply 2 layers of KINGKOTE KK699 heat insulation waterproofing coating (thickness is about 0.4mm approximately)
4. Lastly, apply 1 layer of KINGKOTE KK833 UV protection enhancing coating.

Related coating:

KINGKOTE KK233

KINGKOTE KK699

KINGKOTE KK833

Result:

• KINGKOTE KK233 was effectively enhancing the strength of the external wall surface. At the same time, the wall is not easy to weathering and peeling afterwards. Also, the wall has a basic of water repellent effect.
• KINGKOTE KK699 had heat insulation and reflection effect apparently. The outdoor temperature has been dispersed.
• KINGKOTE KK833 UV protection function enhanced coating strengthen the ability of the surface resistance to stain. Moreover, the surface becomes smooth and makes the wall seems clean and shinier.

Metal Roof Rusty and Leaking

A. Directions: Metallic surface long-term expose under the sun and rain is easy to generate surface oxidation rust and other issues. Apart from this, the screw nailed firmness turn weak because of the heat expansion and contraction caused the roof leaked on raining day. KINGKOTE KK699 heat insulation coating could solve this problem.

B. Countermeasure: In accordance with the following construction methods could be easily solving your problem.

1. Corrugated loose parts must be fixed.
2. Debris such as plastic or clay objects must be removed.
3. Clean up the surface. (Apply antirust coating if necessary)
4. Apply 1 layer of KINGKOTE KK233 as primer.
5. Apply 2 layers of KINGKOTE KK699 heat insulation waterproofing coating (Thickness is about 0.4mm approximately)
6. Lastly, apply 1 layer of KINGKOTE KK833 UV protection enhanced coating.

Related coating:

KINGKOTE KK233

KINGKOTE KK699

KINGKOTE KK833

Result:

• KINGKOTE KK233 was effectively enhancing the strength of the roof. At the same time, the roof had become more firm and secure. Also, the roof had a basic of water repellent effect and it solved the leaking issue.
• KINGKOTE KK699 had heat insulation and reflection effect apparently. The outdoor temperature has been dispersed.
• KINGKOTE KK833 UV protection function enhanced the ability of the coating surface resistance to stain. Moreover, the surface becomes smooth and makes the roof seems clean and shinier.

Toilet Leaking

A. Directions: Most of the common leaking phenomenon that we encountered in the toilet is from toilet’s floor, wall, drainage hole, water pipes and so on. It could be costly to fix the problem with traditional method. However, KINGKOTE KK988 could easily solve this problem without breaking any part of your toilet.

B: Countermeasure: In accordance with the following construction methods could easily solving your problem.

1. Clean up the entire application surface and stop using the toilet for two days.
2. Repair the damaged surface by applying diluted KINGKOTE KK233 original and water in the ratio of 3:1 mixed with cement, and then fill up on the joint of tiles.
3. Fully coating by applying KINGKOTE KK988 after the cement got dried. After that, dunk about 2 minutes and then the excess coating can recycling and apply again next time.

Related coating:

KINGKOTE KK233

KINGKOTE KK988

Result:

• KINGKOTE KK233 was effectively enhancing the strength and adhesion of the cement.
• KINGKOTE KK988 permeability had superior penetration capability. Moreover, it had fully exerted the waterproofing function.

Slab Leaking

First of all, concrete lack of solid is main factor that caused water leaks into the balcony. Secondly, the upper grey sand concrete loose will cause the balcony angle head leaking. KINGKOTE waterproof coating products have multiple of choices that could cope with strange diseases.

Old and new joint leaks:

A. Directions: Normally, old and new joint are fragile and the leaking problem often occurs in the corner.

B. Countermeasure: In accordance with the following construction methods could easily solving your problem.

1. Interface of weathered cracked need to handle properly.
2. Debris such as plastic or clay objects must be removed.
3. Clean up the surface and reduce dust to cover on.
4. Apply one layer of KINGKOTE KK233 as a primer, for waterproofing method use permeable interface to enhance the strength of the balcony.
5. Apply 4 layers of KINGKOTE KK918 on interface (thickness is about 0.8mm approximately).

KINGKOTE KK233

KINGKOTE KK918

Result:

• KINGKOTE KK233 was effectively enhancing the strength and adhesion of cement.
• KINGKOTE KK918 elastic emulsion polymer mortar had exerted waterproof function effectively.

Roof Tiles Leaking

Various types of roof tiles’ surface are normally coated with a layer of uranium. The usage of uranium is to reduce the degree of weathering of roof tiles. Once the uranium performs failure, the tiles will begin to weathering. During raining day, it will be easily invade the houses and caused leaking. Also, tiles cracked, coarse pores are the common problem that caused leaks.

Firewall and roof tiles joint part leaks:

A. Directions: House roof tiles at the edge of the top of the houses are mounted to the firewall. The firewall will be set by using a zinc plate convergence aimed at the prevention of leaks directly. The houses will be start leaking when poor bonding in zinc plate with sand grey interface for a period. KINGKOTE water coating product have multiple of types that could cope with strange diseases.

B. Countermeasure:

1. Debris such as plastic or clay objects must be removed.
2. Clean up the tiles by using clean water.
3. Apply KINGKOTE FN fiber netting to repair the zinc plate and grey sand joint part (Apply KINGKOTE KK233 as mucus).
4. After fiber netting is dried, then apply KINGKOTE KK233 (foundation) original for one layer.
5. After the KK233 coating is dried, then apply KINGKOTE KK968 for 4 layers (thickness is about 0.5mm approximately).
6. Lastly, apply one layer of KINGKOTE KK833 as UV protection.

Related coating and others material:

kingkote-FN

KINGKOTE KK233

KINGKOTE KK968

KINGKOTE KK833

Result:

• KINGKOTE FN (fiber netting) is soft and easy for construction. It can be enclose with different type of objects
• KINGKOTE KK233 has an excellent adhesion originally. It helps fiber netting easily to stick properly with iron surface and sand surface materials (solid wood surface). Besides that, it is difficult to weathering.
• KINGKOTE KK968 high elastic waterproofing coating could stand with bad climate and maintaining excellent adhesion effect.
• KINGKOTE KK833 UV protection function enhanced the ability of the coating surface resistance to stain. Moreover, the surface becomes smooth and makes the roof seems clean and shinier.

Metal Roof Leaking

A. Directions: Screw locked metal roof often encountered leaking problem, screw loose and so on. KINGKOTE waterproof coating products have multiple of choices that could cope with strange diseases.

B. Countermeasure:

1. Clean up the old screws, silicon and other debris.
2. Must lock up the loose screws and apply antirust to clean up the surface.
3. Joint part must be dense tightly.
4. Apply KINGKOTE KK233 original at leaking parts.
5. After the KK233 is dried, then apply KINGKOTE KK968 at leaking parts again. Cover up KINGKOTE FN (fiber netting) on top afterwards. Lastly, apply at least 3 layers of KINGKOTE KK968 again (Thickness is about 0.5mm approximately).
6. In the end, apply one layer of KINGKOTE KK833 as UV protection.

Related coating and others material:

kingkote-FN

KINGKOTE KK233

KINGKOTE KK968

KINGKOTE KK833

Results:

• KINGKOTE FN (fiber netting) is soft and easy for construction. It can be enclose with different type of objects
• KINGKOTE KK233 has an excellent adhesion originally. It helps fiber netting easily to stick properly with iron surface and sand surface materials (solid wood surface). Besides that, it is difficult to weathering.
• KINGKOTE KK968 high elastic waterproofing coating could stand with bad climate and maintaining excellent adhesion effect.
• KINGKOTE KK833 UV protection function enhanced the ability of the coating surface resistance to stain. Moreover, the surface becomes smooth and makes the roof seems clean and shinier.